Multi-Function Transmission Range Switch

Multi-Function Transmission Range Switch

Removing

- Removing left transmission support. Refer to => [ Transmission Mounts ] 01VA Transmission.

- Unbolt Multi-Function Transmission Range (TR) Switch (F125) from transmission and pull off from shift rod.

Installing

- Connect Multi-Function Transmission Range (TR) Switch (F125) to shift rod. Flap part at splines in switch - 3 - must align with flat part of shift rod - 1 -.





• Set Multi-Function Transmission Range (TR) Switch ( F125) onto shift rod in centered manner. Do not cant and do not set with force. Risk of damage at switch terminals.

- Rotate switch until the alignment bore - 4 - at switch housing can be fitted on the alignment pin - 2 - at transmission housing.





- Installing left transmission support. Refer to => [ Transmission Mounts ] 01VA Transmission.

Tightening specifications