Diagnostic Trouble Code (DTC) Memory, Erasing (VAS 5051)

Diagnostic Trouble Code (DTC) Memory, Erasing

NOTE: If it is not possible to erase DTC memory, check it once again and remedy malfunctions.

Requirements
- DTC memory checked.
- All malfunctions repaired.

After DTC memory has been successfully checked:







Display on VAS5051:
- Under -1- select diagnostic function "05 - Erase DTC memory".







Display on VAS5051:
1 - No display (before erasing)
or
- DTC memory erased

NOTE: The following message appears in display zone -1-: "DTC memory not yet checked", if the operational sequence was not adhered to exactly. If the DTC memory has been checked beforehand, the DTC memory can only be erased.

2 - NOTE:
- Should the function be carried out?

NOTE: Data will be erased.

- Press "OK" button in display -2-.
- Exit function "05 - Erase DTC memory" by pressing <- button.
- Check DTC memory again after repair work and erase it if necessary.

NOTE: This erases DTCs that have been stored while the malfunction was being fixed, for example, malfunctions that have arisen as a result of connectors being detached.