Clutch C

Clutch C





1 - ATF pump with outer plate carrier "C "

• Check inner splines for scoring from lining discs => [ Check inner splines on ATF pump with outer disc
carrier for scoring from lining discs ]

5 - Plate spring

• Replace in case of signs of wear or if dished washer tips are bent

6 - Split retaining ring

• Replace if deformed

8 - Coated plates

• Checking for wear => [ Checking coated and outer plates for wear ]

9 - Outer plates

• Checking for wear => [ Checking coated and outer plates for wear ]

Check inner splines on ATF pump with outer disc carrier "C" for scoring from lining discs





- Check inner splines for signs of wear caused by coated plates.

• Coated plates must not get caught in scoring - arrows -.

If scoring - arrows - caused by coated plates are greater than 0.5 mm:

- Replace outer plate carrier "C".

Checking coated and outer plates for wear





Signs of overheating on outer plates point to worn coated plates. Evaluate signs of wear as follows:

A Spots of discoloration of outer plate caused by overheating in distance of more than 20 mm: Outer and coated plates OK, can be reused.
B Spots of discoloration of outer plate caused by overheating in distance of less than 20 mm: Outer and coated plates worn, must be replaced.
C Tarnish blue/brown at outer and/or inner area of outer plate: Outer and coated plates overheated and worn, must be replaced.