Manual Transmission - Internal

Special Tools

Special tools, testers and auxiliary items required

• Driving sleeve (32 - 109)





• Taper roller bearing puller (VAG 1582)

• Attachment (VAG 1582/12)





• Socket and key (T40097)





• Straight edge (T 40100)









Special tools, testers and auxiliary items required

• Holding plate (VW 309)

• Transmission support (VW 353)

• Tube (VW 415 A)

• Tube (VW 421)

• Slide Hammer-Complete Set (VW 771)

• Driver (32 - 111)





Special tools, testers and auxiliary items required

• Thrust piece (40 - 105)

• Drive bushing (41 - 501)

• Torque wrench (VAG 1331)

• Torque wrench (VAG 1332)

• Puller (T40054)

• - 1 - Two arm puller (Kukko 20/10 )

• - 2 - Puller hooks, 250 mm long





Special tools, testers and auxiliary items required

• Thrust plate (VW 401)

• Thrust plate (VW 402)

• Punch (VW 408 A)

• Punch (VW 412)

• Thrust plate (VW 454)

• Thrust plate (VW 554)





Special tools, testers and auxiliary items required

• Punch (2005)

• Thrust plate (2050)

• Seal driver-front wheel bearing (30 - 100)

• Torque wrench (VAG 1331)

• Pulling hook (T20143)

• Thrust plate (T40106)





Special tools, testers and auxiliary items required

• Thrust ring (2006 A)

• Lock pin (2064)

• Thrust pad (3062)

• Alignment fixture (3253)

• - 1 - Internal extractor (Kukko 21/2 )

• - 1 - Internal extractor (Kukko 21/4 )

• - 4 - Support (Kukko 22/2)





Special tools, testers and auxiliary items required

• Drift (VW 295)

• Adapter (VW 295 A)

• Tube (VW 423)

• Slide Hammer-Complete Set (VW 771)

• Holding plate (VW 801)

• Guide pin (10 - 15)