Side Trim, Tunnel Side
Side Trim, Tunnel Side
Special tools, testers and auxiliary items required
• Engine and transmission holder (VAS 6095)
• Fixture for seat repair (VAS 6136)
1 Backrest
2 Rear Side Trim (Sill Side)
3 Plastic Rivets (Qty. 2)
4 Bolt
5 Bracket
6 Retainers (Qty. 2)
7 Eye
8 Front Side Trim (Sill Side)
9 Catch
10 Connector (Qty. 3)
11 Retainer
12 Side Trim (Tunnel Side)
• Removing
- Remove seat. Refer to => [ Power Front Memory Seat ] Power Front Memory Seat.
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Attach the front seat to the fixture for seat repair (VAS 6136).
- Loosen footwell cover retaining strip from side panel. Refer to => [ Footwell Cover Retaining Strip, Loosening ].
- Position a screwdriver to head of plastic rivet - 13 - (Qty. 2).
- Pry out plastic rivet - 13 - (Qty. 2) by turning the screwdriver.
- Remove side panel - 12 - upward.
• Installing
To install, perform the steps used in removal in reverse order. When doing so, note the following:
- Slide footwell fastening strip into side trim bracket. Refer to => [ Footwell Cover Retaining Strip, Loosening ].
13 Plastic Rivets (Qty. 2)
Footwell Cover Retaining Strip, Loosening
- Disengage retaining strip - 1 - on footwell cover - 2 - from brackets - 4 - (Qty. 2) on side panel - 3 -.