Engine, Securing to Engine and Transmission Holder

Engine, Securing to Engine and Transmission Holder

Special tools, testers and auxiliary items required

• Lifting tackle (2024 A)

• Engine and transmission holder (VAS 6095) with bracket (VAS 6095/1-5)

• Shop crane (VAS 6100)

• Lift arm extension for workshop crane (VAS 6101 )

Procedure

• Engine separated from transmission.

- Hook engine sling (2024 A) onto engine and onto workshop crane (VAS 6100) with lift arm extension for workshop crane (VAS 6101) as shown in the illustration.





• To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

CAUTION!
Lifting hooks and alignment pins on the engine sling must be secured with securing pins - arrows -.

With manual or multitronic transmission:

- Disconnect electrical connector - 1 - on right engine mount.





- Remove bolts - arrows - and right engine support.

All:

- Disconnect electrical connector - 1 - on left engine mount.





- Remove bolts - arrows - and left engine support.

- Secure engine using bracket (VAS 6095/1-5) to 40 Nm Engine and Transmission Holder (VAS 6095) as shown in illustration.