Ultrasonic Sensor: Service and Repair

Anti-Theft Alarm System Sensor, from 07.2006

Removing





- If the control module is replaced, select "Replace" function for the respective control module in "Guided Functions"Vehicle diagnosis, testing and information system VAS 5051.

- Remove front interior/reading light. Refer to => [ Interior/Front Reading Lamp, from 06.2006 ] Roof Lamps and Switches.

- Release retaining clips - arrow A - and tip Anti-Theft Alarm System Sensor (G578) - item 3 - out of interior light/reading light - arrow B -.

- Using a small screwdriver - 1 -, carefully unclip individual interior monitoring sensors - 2 - from interior light/reading light.

Installing

Install in reverse order of removal, observing the following:

- Connect electrical connector.

- Install front interior/reading light. Refer to => [ Interior/Front Reading Lamp, from 06.2006 ] Roof Lamps and Switches.