Seat Height Adjustment Motor, Removing and Installing

Seat Height Adjustment Motor, Removing And Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136

NOTE: If motor is defective, replace upper seat pan frame.







1 - Four-way lumber support motors (Qty. 2)
2 - Seat height adjustment motor

- Removal
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove side trim on sill side.
- Remove side trim on tunnel side.
- Remove the backrest.
- Remove cover and padding from seat pan.
- Remove control module.
- Remove belt buckle.
- Remove spring mat with wiring harness from seat pan.
- Separate upper seat pan frame from lower seat pan frame.

- Installing
Installation is reverse of removal.
3 - Seat angle adjustment motor
4 - Longitudinal seat adjustment motor
5 - Backrest adjustment motor