Speedometer Vehicle Speed Sensor

Speedometer Vehicle Speed Sensor

Removing

- Remove heat shield - 1 - for left drive axle (arrows), if installed.





Third bolt is not visible in the illustration.

- Disconnect harness connector from Speedometer Vehicle Speed Sensor (VSS) (G22) (arrow - A -).





- Push retaining bracket of sensor downward, and turn (arrow).

- Remove sensor.

Installing

- Replace sealing rings (arrows).





- Insert O-rings with gear oil.

- Insert sensor.

- Engage retaining bracket at mounting bracket for flange shaft.

- Install heat shield - 1 - for left drive axle (arrows), if present.





Third bolt is not visible in the illustration.