Operation CHARM: Car repair manuals for everyone.

HID Headlamps






High-Intensity Gas Discharge Lamp Control Module, through MY 2006

CAUTION!
Danger to life due to high voltage.

Usage and safety information for gas discharge headlamps. Refer to => Lighting and Horns Lighting and Horns

Removing





- With ignition switched off, disconnect battery Ground (GND) wire => [ Battery, Disconnecting and Connecting ] [1][2]Battery.

- Remove headlamp. Refer to => [ HID Headlamp, through MY 2006 ] HID Headlamp, Through MY 2006.

- Remove the screws - arrows - and remove retaining bracket - 2 -.

- Remove control module - 1 - for the gas discharge lamp from headlamp housing and disconnect the connectors.

Installing

Install in reverse order of removal, observing the following:

- Check seal between High-intensity Gas Discharge Lamp Control Module and headlamp housing.

- Install headlamp.

- Connect battery. Required actions => [1][2]Battery.

Tightening Specifications