Transmission Input Speed Sensor

Transmission Input Speed Sensor

Removing

- Removing valve body. Refer to => [ Valve Body ] Valve Body.

- Unbolt Sensor for transmission RPM - A - from transmission.





Installing

- Bolt on Sensor for transmission RPM - A - at transmission via bolt - B -. Tightening torque is 9 Nm.

- Route wire with connector - C - according to illustration, so that the wire is not pinched when installing the valve body.

- Installing valve body. Refer to => [ Valve Body ] Valve Body.

- Fill up ATF. Refer to => [ ATF, Changing or Filling after Repairs ] [1][2]ATF, Changing or Filling After Repairs.