Airbag Adapter VAS 6036 , Connecting

Airbag Adapter VAS 6036 , Connecting

Special tools, testers and auxiliary items required







- Airbag adapter VAS 6036







- Vehicle Diagnosis, Testing and Information System VAS 5051 A

CAUTION:
- Technician must be grounded before disconnecting ignition and ground wiring, touching door striker or body.
- The Airbag Adapter VAS 6036 must stay connected to seat until seat is installed again.







1 - Side airbag connector, seat side (yellow)
2 - Side airbag connector, adapter side (yellow)
- Disconnect ignition and ground wiring.
- Attach adapter-side of side airbag connector - 2 - to seat-side of side airbag connector - 1 -.
3 - Power supply connector, adapter side (red)
4 - Power supply connector, seat side (red)

Side airbag connector, disconnecting







- Press catch - 3 - on connector for side airbag - 2 - from counterpart - 1 - and remove it.
- Follow measures after connecting battery.

NOTE: If the Airbag Malfunction Indicator Lamp (MIL) K75 shows a malfunction after assembly, DTC memory must be checked with Vehicle Diagnostic, Testing and Information System VAS 5051 A , cleared and then rechecked.