Daytime Running Lamp, Replacing Bulb

Daytime Running Lamp, Replacing Bulb

Removing

- Turn light switch to position "0".

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

Right headlamp

- Remove screws - arrows -.





- Remove air ducts - 1 - and - 2 -.

Both sides, continued:





- Release retaining tab - arrow - and detach housing cover for side lamps from headlamp housing.

- Turn bulb holder - 1 - counter-clockwise - arrow - and remove from headlamp housing.





- Screw bulb out of bulb holder.

Installing

Install in reverse order of removal, noting the following:

CAUTION!
• Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.

• When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Fit new bulb in housing.

- Secure bulb holder by turning clockwise.

- Close housing cover.