Ribbed Belt Drive Component Overview

Ribbed Belt Drive Component Overview





1 Ribbed belt

• Check for wear

• Before removing, mark direction of rotation using chalk or felt-tip marker. Reversing direction of rotation of a run-in belt can destroy the belt

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt

• When installing, make sure it is seated correctly on the pulleys

2 20 Nm plus an additional 90° (1/4 turn)

• Replace

3 22 Nm

4 Generator

• Removing and installing, refer to => Starting and Charging Starting and Charging

5 Cap for idler pulley

6 Idler roller for ribbed belt

• Tighten to 40 Nm

7 20 Nm

8 Ribbed belt pulley for coolant pump

9 9 Nm

10 Coolant pump

• Removing and installing, refer to => [ Coolant Pump ] Service and Repair

11 Cap for tensioning element

12 Tensioning element for ribbed belt

• Tighten to 40 Nm.

13 20 Nm

14 20 Nm

15 Bracket for power steering pump

16 20 Nm

17 Power-steering pump

• Removing and installing, Refer to => Steering Steering

18 20 Nm

19 Belt pulley for power steering pump

• Identification: "Vorne/Front"

20 20 Nm

21 25 Nm

22 Air conditioner compressor

• Removing and installing, refer to => Heating and Air Conditioning Heating and Air Conditioning

• Observe alignment sleeves => [ (Item 23) Alignment bushing ] when installing

23 Alignment bushing

• 2 pieces

24 Bracket for air conditioning compressor

• Observe alignment sleeves => [ (Item 23) Alignment bushing ] when installing

25 Vibration damper

• Removing and installing, refer to => [ Vibration Damper ] Vibration Damper