Rear Lid Lettering, Avant

Rear Lid Lettering, Avant

from VIN 400 001

• Outer edges of rear lid and lines extending from lower rear lights are used as reference edges.

Installation:

- Warm vehicle and type designation to room temperature.

- Bonding surfaces must be dry and free from dust and grease.

- Clean outer panel with mineral spirits, treat with silicone remover and rub dry.

- Pull off backing paper and press on characters - 1 -, maintaining pressure for approx. 3 seconds.

Dimensional data for Front-Wheel Drive (FWD) vehicles





• a = 95 mm

• b = 33 mm

• c = 38 mm

• d = 28 mm

• e = 95 mm

Dimensional data for All Wheel Drive (AWD) vehicles





• a = 33 mm

• b = 28 mm

• c = 4 mm

• d = 12.5 mm

• e = 38 mm

• f = 95 mm

from VIN 400 001

Dimensional data for Front-Wheel Drive (FWD) vehicles





• a = 50 mm

• b = 30 mm

• c = 65 mm

• d = 50 mm

Dimensional data for All Wheel Drive (AWD) vehicles





• a = 50 mm

• b = 30 mm

• c = 65 mm

• d = 50 mm

• e = 4 mm