Cleanliness Working Conditions

Cleanliness Working Conditions

• Thoroughly clean all connections and the surrounding area before disconnecting.

• Clean the transmission and transmission components using Cleaning Solution (D 009 401 04).

• Use lint-free cloths when cleaning. Audi recommends the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.

• Seal all open lines and connections immediately with clean plugs or caps from the Engine Plug Set (VAS 6122).

• Place parts that have been removed on a clean surface and cover. Use foil or lint-free cloths.

• Carefully cover or plug unpacked components if repairs cannot be performed immediately.

• Only install clean components: Only unpack replacement parts immediately prior to installation.

• Protect disconnect electrical connectors from dirt and moisture and only connect when they are dry.