Radar Interior Monitoring Control Module 1

Radar Interior Monitoring Control Module 1

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Functions" routine Vehicle diagnosis, testing and information system VAS 5051.

- Switch off ignition and remove ignition key.

- Remove rear seat bench.

- Remove nuts - arrows -.





- Disconnect electrical connector - 2 -.

- Remove the Radar Interior Monitoring Control Module 1 (G303) - 1 - from the floor panel.

Installing

Install in reverse order of removal, observing the following:

- Install the rear seat bench.

Tightening Specifications