Front Seats (Power Seat With Memory)

Control Module For Memory Seat, Removing And Installing

NOTE:
- The control module for power seat with memory is located beneath the seat.
- With malfunctioning control module, the upper frame of seat pan with backrest must be loosened.

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1783







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







- Removal
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove bolts - 2 - (2x).
- Turn control module - 1 - around.







- Disengage retaining bracket - 4 - and disconnect connector - 5 -.
- Press in catches - 3 - (2x) and disconnect connector - 2 -.
- Remove control module - 1 -.
- Loosen control module from brackets (2x) at nuts (2x) on left and right.

- Installing
Installation is reverse of removal. When doing so, note the following:
- Tightening torques for bolts - 2 - : 1.5 Nm