Seat Height Adjustment Motors Assembly Overview

Recaro Front Seats, from November 2004

• From August 2005, the conventional wiring harness routing to the connector station under the front seat. Refer to => [ Connectors, Disconnecting ] Connectors, Disconnecting has been replaced with modular wiring routing. Refer to => [ Modular Wiring Routing, from August 2005, Assembly Overview ] Standard Front Seat, From November 2004.

• The modular wiring routing has not been implemented for all countries.

Seat Height Adjustment Motors Assembly Overview





1 Seat Pan Upper Frame

• with cover and upholstery

• Removing and Installing => [ Seat Pan, Disassembling and Assembling ] Power Front Memory Seats, From November 2004

2 Toothed Segment

• Plastic toothed segment

• Removing and Installing => [ Seat Height Adjuster Toothed Segment ] Recaro Front Seats, From November 2004

• Clipped to fitting

3 Driver's Seat Height Adjustment Motor (V245) or Front Passenger's Seat Height Adjustment Motor ( V246)

• Removing and Installing => [ Seat Height Adjustment Motors ] Recaro Front Seats, From November 2004

4 Screw

Self-locking

• 31 Nm

• Quantity: 2

• replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

5 Seat Pan Lower Frame

• Removing and Installing, refer to => [ Seat Pan, Disassembling and Assembling ] Power Front Memory Seats, From November 2004