Instrument Cluster

Instrument Cluster

Special tools, testers and auxiliary items required

• Hook (3370)

Removing

• Do not disassemble instrument cluster.

• Instrument clusters contain no field serviceable components. Should malfunctions occur, replace complete instrument cluster.

- If instrument cluster is to be replaced, connect VAS 5051/5052 and initiate OBD program option "Instrument cluster, replacing" => [ OBD, Function ] OBD, Function

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Pull steering wheel with adjusting mechanism fully out and move it downward.

• For clarity, steering wheel is shown removed in the following illustrations.

- Pull off bottom cover - 1 - towards rear - arrows -.





- Remove screws - arrows -.





- Remove left instrument panel side cover - arrow - using hook (3370).





- Reach through opening - arrow A - above fuse panel and push out instrument cluster in direction of - arrow B -.





- Disengage lock on electrical connectors - arrow - and disconnect.





- Remove instrument cluster from instrument panel opening.

Installing

Install in reverse order of removal, noting the following:

- After installation, perform functional test of instrument cluster.

- If instrument cluster is replaced, continue to follow VAS 5051/5052 tester prompts in conjunction with OBD program option "Instrument cluster, replacing" => [ OBD, Function ] OBD, Function