Window Regulator Switch

Switches

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Window Regulator Switch

• The driver's side window regulator switch is depicted in the illustration.

• Passenger's side window regulator switch is removed in the same manner.

Removing

- Position a flat screwdriver at the armrest hole as depicted in the illustration.





- Press back retaining tab of window regulator switch - arrow - and remove switch upward from armrest.

- Disconnect connector.

- Carefully release catches - arrows - using a small screwdriver.





- Remove window regulator switch - 1 - downward from switch mount - 2 -.

Installing

Installation is reverse of removal, paying attention to the following:

- Press window regulator switch into switch mount until catches engage.