Diagram 78/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Barometric Pressure (BARO) Sensor, Intake Air Temperature (IAT) Sensor, Engine Coolant Temperature (ECT) Sensor, Intake Manifold Runner Position Sensor, Low Fuel Pressure Sensor, Intake Flap Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F96 - Barometric Pressure (BARO) Sensor 1.8L T AMB

G42 - Intake Air Temperature (IAT) Sensor Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G336 - Intake Manifold Runner Position Sensor Locations

G410 - Low Fuel Pressure Sensor Locations

J623 - Engine Control Module (ECM) Locations

T60 - 60-Pin Connector, black

V157 - Intake Flap Motor 2.0L BPG and BWT

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D141) - Connection (5V) (in wiring harness), engine pre-wiring

Previous Diagram 78/7 (Tracks 71-84)

Next Diagram 78/9 (Tracks 99-112)