Power Distribution Module: Service and Repair

Vehicle Electrical System Control Module

• Should Vehicle Electrical System Control Module ( J519) require replacement, follow replacement procedures as specified using VAS 5051/5052 in mode "Guided Fault Finding".

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Where applicable, remove driver's storage compartment.

- Remove nuts - arrows - and remove Vehicle Electrical System Control Module (J519) - 1 -.





- Unclip fuse carriers - 1... 3 -.





- Release retaining clip at connector - 4 - and disconnect connector.

- Disconnect electrical connections - 5 - and - 6 -.

Installing

Install in reverse order of removal, noting the following:

- Install driver's storage compartment.

Tightening Specifications