Selector Mechanism Assembly Overview

Selector Mechanism Assembly Overview

CAUTION!
Shift selector lever into position "P" and engage parking brake before working with the engine running.

• Grease mounting points and contact surfaces with Polycarbamide Grease (G 052 142 A2).

• Replace the complete selector mechanism if the gate or the shift mechanism housing is faulty => [ (Item 12) Gate ] or => [ (Item 14) Selector lever housing ]. It is not possible to adjust both components using workshop equipment.





1 Shift mechanism bottom cover

2 Retaining bracket for selector lever

3 Bushing

4 Tiptronic locking lever

5 Pivot pin

6 Selector lever

7 Shift lock solenoid (N110)

• Removing and installing, refer to => [ Shift Lock Solenoid ] 01V,01VA Transmission

8 Operating lever for locking cable

9 Lock for locking cable

10 Lever for locking cable

11 Locking lever

12 Gate

• Clipped onto selector housing => [ (Item 14) Selector lever housing ] and bolted to 0.4 Nm

13 10 Nm

14 Selector lever housing

15 Bushing

16 Retaining bracket for selector lever

17 Retaining clip

• Replace

18 Tiptronic locking lever

19 Pivot pin

20 10 Nm