Controls, Housing
Special Tools
Special tools, testers and auxiliary items required
• Support clamp (VW 313)
• Workshop crane (VAS 6100)
• Transmission lift hook (T40013)
• Drift sleeve (VW 244 B)
• Tube 60 mm dia. (VW 415 A)
• Thrust pad con. (VW 433)
• Thrust pad (VW 447 i)
• Centering mandrel (3176)
• Press tool (VW 408 A)
• Thrust tube (VW 454)
• Installing sleeve (VW 455)
• Tube 42 mm dia. (VW 516)
• Thrust pad (3074)
• Internal puller (Kukko 21/5)
• Internal puller (Kukko 21/6)
• Counter-support (Kukko 22/1)
• Counter-support (Kukko 22/2)
• Drift (T40085)
• Hose clip pliers (VAG 1275)
• Extractor lever (T20143/1)
• Insert pad for front fender (T40045)
Special tools, testers and auxiliary items required
• Engine support bridge (10-222 A)
• Transmission support (3282)
• Adjustment plate (3282/43)
• Torque wrench (VAG 1331)
• Torque wrench (VAG 1332)
• Engine and transmission jack (VAG 1383 A)
Special tools, testers and auxiliary items required
• Sleeve (VW 519)
• Holding fixture (VW 540)
• Press tube (30 - 23)
• Press tool (40 - 21)
• Sleeve (40 - 103)
• Thrust piece (40 - 105)
Special tools, testers and auxiliary items required
• Drift sleeve (41 - 501)
• Transmission support (2004)
• Mandrel (2064)
• Thrust piece (3002)
• Door hinge alignment tool (M8 and M10) (3114/2)
• Fitting tool (T10246)
Special tools, testers and auxiliary items required
• Repair press (VAG 1290 A)
• Drip tray (VAG 1306)
• Torque wrench (VAG 1331)
• Torque wrench (VAG 1332)
• Taper roller bearing puller (VAG 1582)
• Adapter (VAG 1582/12)
• - 1 - Internal puller (Kukko 21/2 )
• - 2 - Puller (Kukko 18/2)
Special tools, testers and auxiliary items required
• Removal plate (T40086)
• Holding plate (T40088/1)
• - 1 - Two-arm puller (Kukko 20/10 )
• - 2 - Puller hook, length 200 mm
• - 2 - Puller hook, length 250 mm
Special tools, testers and auxiliary items required
• Thrust plate (VW 401)
• Thrust plate (VW 402)
• Press tool (VW 408 A)
• Thrust disc (VW 412)
• Thrust pad (VW 512)
• Sleeve (VW 519)
Special tools, testers and auxiliary items required
• Needle bearing drift (VW 295)
• Needle bearing drift (VW 295 A)
• Press tool (VW 408 A)
• Tube (VW 423)
• Multi-purpose tool (VW 771)
• Support plate (VW 801)
Special tools, testers and auxiliary items required
• Guide pin (10 - 15)
• Installing tool (40 - 503)
• Torque wrench (VAG 1331)
• Drift (T40085)