Central Locking System Component Overview, Sedan

Central Locking System Component Overview, Sedan





1 - Front Passenger's Door Control Module (J387)

• Integrated in window regulator.

2 - Right Rear Door Control Module (J389)

• Integrated in window regulator.

3 - Fuel Tank Lid Unlock Motor (V155)

• Removal => [ Removing ]

4 - Rear Lid Unlock Motor ( V139)

5 - Left Rear Door Control Module (J388)

• Integrated in window regulator.

6 - Driver's Door Control Module (J386)

• Integrated in window regulator.

7 - Comfort System Central Control Module (J393)

• Before removing, disassemble left front seat

• Remove lower A-pillar trim.

• Removal => [ Removing ]

8 - Front Hood Switch (F266)

• Component location in lock carrier

Removing Comfort System Central Control Module (J393)





- Left front seat and lower A- pillar trim removed.

- Ignition switched off.

- Open box - 1 - for control module.

- Disconnect harness connector from control module - 2 - and remove it.

Removing Fuel Tank Lid Unlock Motor (V155)





- Disconnect electrical connector.

- Loosen bolts - arrows - using special tool ( T10010), slide actuator - 1 - toward front and remove.

- Before installing actuator, emergency release - 3 - must be slid over the locking pin.

- Locking pin of actuator must move cleanly into closed fuel filler flap - 2 -.