Headrest Guides With Locking Mechanism

Headrest Guides with Locking Mechanism

Removing





- Push release button - 2 - in - direction of arrow A - and pull headrest - 1 - upward as far as possible - arrow B -, keep release button pushed while doing so.

- Press release button - 2 - on headrest - 1 - until stop - arrow -.





- Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.

- Remove headrest completely from headrest guides.

• For the sake of illustration, headrest guide is depicted as removed.





- Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (it is located across from retaining clip for headrest guide).

- Disengage catch - 2 - of headrest guide - 1 - in - direction of arrow B -, press screwdriver - 3 - in - direction of arrow A - to do so.

- Remove headrest guide.

Installing

To install, perform the steps used in removal in reverse order.