Seat Pan Cover and Cushion, Sport Seat

Seat Pan Cover and Cushion, Sport Seat









1 Cover

• Removal:

- Remove seat: vehicles from November 2004 => [ Standard Front Seat ] Standard Front Seat, From November 2004.

- Remove backrest: vehicles from November 2004 => [ Backrest, Standard Front Seat ] Standard Front Seat, From November 2004.

- Unclip connector for heated seat - 2 - from bracket.

- Pry out plastic strips - 3 - all around using a screwdriver.

- for vehicles with LATCH bracket and new cover - 1 -, cover must be cut in at LATCH bracket => [ LATCH Bracket Cover ].

2 Seat Heating Connector

3 Circular Plastic Strips

4 Fastening Strips

5 Plastic Clips

• Replace damaged plastic clips

6 Upholstery

7 Seat Heating

8 Seat Pan





1 Seat Cushion Extension

• Removal:

- Remove nuts - 2 - (Qty. 4).

- Remove cover and upholstery.

• Installing:

To install, perform the steps used in removal in reverse order. Observe the following when doing so:

- Damaged plastic clamps must be replaced.

2 Nuts (Qty. 4)

Seat Cushion Extension, Separating from Cover and Upholstery





1 Clips (Qty. 3)

2 Fastening Strips (Qty. 5)

3 Seat Cushion Extension

- Pry out grip channels - 2 - (Qty. 5).

- Pry out clips - 1 - (Qty. 3).

- Remove seat cushion extension - 3 -.

Cover, Separating from Upholstery





1 Cable Ties (Qty. 2)

2 Rods (Qty. 2)

- Remove upholstery.





1 Cover

- Remove upholstery.

- for vehicles with LATCH bracket and new cover - 1 -, cover must be cut in at LATCH bracket => [ LATCH Bracket Cover ].

2 Plastic Clips

• Replace if damaged

3 Fastening Strips