Cover and Cushion For Seat Pan, Removing and Installing (Sport Seat)

Cover And Cushion For Seat Pan, Removing And Installing (sport Seat)







1 - Cover

- Removal:
- Remove seat: Vehicles until 10.04 vehicles from 11.04.
- Remove backrest: Vehicles until 10.04 vehicles from 11.04.
- Unclip connector for heated seat - 2 - from bracket.
- Pry out plastic strips - 3 - all around using a screwdriver.
- For vehicles with LATCH "Lower Anchor and Tethers for CHildren" bracket and new cover - 1 -, cover must be cut in at LATCH "Lower Anchor and Tethers for CHildren" bracket.
2 - Seat heating connector
3 - Circular plastic strips
4 - Fastening strips
5 - Plastic clips
- Replace damaged plastic clips
6 - Upholstery
7 - Seat heating
8 - Seat pan







1 - Seat cushion extension

- Removal:
- Remove nuts - 2 - (4x).
- Remove cover and upholstery.
- Installing:
Installation is reverse of removal. Observe the following when doing so:
- Damaged plastic clamps must be replaced.
2 - Nuts (4x)

Separating seat cushion extension from cover and cushion







1 - Clips (3x)
2 - Fastening strips (5x)
3 - Seat cushion extension
- Pry out grip channels - 2 - (5x).
- Pry out clips - 1 - (3x).
- Remove seat cushion extension - 3 -.

Separating cover from upholstery







1 - Cable ties (2x)
2 - Rods (2x)
- Remove upholstery.







1 - Cover
- Remove upholstery.
- For vehicles with LATCH "Lower Anchor and Tethers for CHildren" bracket and new cover - 1 -, cover must be cut in at LATCH "Lower Anchor and Tethers for CHildren" bracket.
2 - Plastic clips
- Replace if damaged
3 - Fastening strips