Headrest Microswitch

Headrest Microswitch





1 - Cable tie

2 - Connector

3 - Retainer

4 - Head Restraint Micro Switch

• Removing

- Remove backrest cover panel. Refer to => [ Backrest Cover ] Backrest Cover.

- Use a screwdriver to pry out circlip - 3 -.

- Press the tabs - 5 - (Qty. 2) together and remove the micro switch - 4 -.

- Remove connector - 2 -.

• Installing

- Press the micro switch - 4 - in until the tabs - 5 - (Qty. 2) engage.

- Connect the connector - 2 -.

- Install the seat.

- Install the head restraint micro switch. Refer to => [ Headrest Micro switch, Adjusting ] Power Front Memory Seats.

- Install the circlip - 3 -.

- Install the backrest cover. Refer to => [ Backrest Cover ] Backrest Cover.

5 - Retainer Tabs (Qty. 2)