Cupholder

Cupholder





1 Tray

2 Cover

3 Center Armrest

4 Retaining Tabs (quantity: 9)

5 Trim

6 Cup Holder

• Removing

- Remove center armrest. Refer to => [ Center Armrest ] Center Armrest.

- Fold cover - 2 - up.

- Pry the trim - 5 - out all around at the retaining tabs - 4 - (quantity: 9).

- Pry the tray - 1 - out of the retaining tabs - 7 - (quantity: 6) beginning at the front and then at the left and right. Pull the tray forward and up to remove.

- Place a screwdriver at rear of cup holder - 6 - and pry it out as straight as possible.

• Installing

To install, perform the steps used in removal in reverse order.

7 Retaining Tabs (quantity: 8)