Footwell Lamp

Interior Lamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Footwell Lamp

• Remove footwell lamps to replace bulbs.

• Bulb for footwell lamp: 12 V, 5 W

Removing

- Using a flat screwdriver, press in retaining tab - 1 - and pry out footwell lamp - 2 -.





- Unplug connector - 3 -.

- Remove bulb from socket on back side of footwell lamp.

Installing

Installation is reverse order, paying attention to the following:

- Plug in connector.

- Insert footwell lamp in opening and clip in at opposite side.