Front Interior and Reading Lamp

Interior Lamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Front Interior and Reading Lamp

Special tools, testers and auxiliary items required

• Pry lever (80-200)

Removing

- Carefully pry off interior lamp at rear edge from windshield frame using pry lever (80-200) remove outside mirror. While doing so, note holding tabs - arrows -.





- Unplug connectors.

Installing

Installation is reverse of removal, paying attention to the following:

- Press interior lamp into windshield frame until it engages.

Front Interior and Reading Lamp

Removing

- Remove front interior lamp/reading lamp => [ Front Interior and Reading Lamp ].

- Turn light bulb 12 V, 5 W - arrow - out of socket on rear side of interior lamp/reading lamp.





Installing

Installation is reverse of removal, paying attention to the following:

- Press interior lamp into windshield frame until it engages.