Tail Lamp and Bulb Holder

Tail Lamp and Bulb Holder

Removing





- Turn the cap in the luggage compartment trim panel - arrow - and remove.

- Remove bolt - 1 -.





• The outer tail lamp can not be removed if the screw is not removed.

• - 2 - may not be loosened to remove the tail lamp.

- Slide the tail lamp - arrows - and disengage it from the pin on the body.

- Disconnect electrical harness connector at taillight.

- Turn bulb socket counter-clockwise - arrow - and remove from housing.





- Twist bulb out of bulb socket.

Installing

Install in reverse order of removal, observing the following:

• Make sure seal between body and tail lamp housing seals properly.

- Position taillight on retaining bolts from outside and press on in direction of vehicle center until it locks.

Tightening Specifications