Measurement Preparations

Measurement Preparations

Special tools and workshop equipment required

• Wheel Alignment Computer (V.A.G 1813)

• Brake Pedal Actuator (V.A.G 1869/2)

• Bolt for Steering Centering (VAS 6224)

• Level Regulating Tool (V.A.G 1925)

Rim Run-Out Compensation

The lateral run-out of the wheel must be compensated for. Otherwise, measurement will result in false readings.

A correct toe-in adjustment will not be possible without performing lateral run-out compensation!

- Perform wheel run-out compensation. For this, observe notes by manufacturer of wheel alignment equipment.

- Install Brake Pedal Loading Device (V.A.G 1869/2 ).