Suction Jet Pump

Suction Jet Pump

Removing

Proceed as follows:

- Remove input shaft => [ Input Shaft ] Input Shaft.

- Remove chain and disc set "I"=> [ Chain and Disc Set I ] Chain and Disc Set I.

- Remove oil pipe - 1 -.





- O-ring - 2 - from the oil pipe.

- Remove bolts - arrows -.





- Remove suction jet pump from guide and then pull it to the side - arrow 1 -.





- Tilt suction jet pump out of the retaining pins - arrow 2 -.

- Remove suction jet pump - arrow 3 -.





Installing

• Tightening specifications => [ Chain and Disc Set I Assembly Overview ] Chain and Disc Set I Assembly Overview.

Installation is in reverse order of removal.