Rear Lid Lock Cylinder

Rear Lid Lock Cylinder





1 Rear Lid

2 Cover

3 Combination screw

• 5 Nm

4 Lock cylinder

Removal:

• Before removal, remove rear lid trim.

• Remove bolt - 3 -.

• Remove clamping pin from expanding clip- 7 -and remove expanding clip from lid.

• Remove cover from locking mechanism.

• Disengage release from locking mechanism on lock cylinder.

Installing:

• Insert lock cylinder in grip piece and turn with key to stop.

• Engage the release in the lock cylinder and engage it in the housing.

• Insert cover and let it engage

• Install screw and clip cover with rear lid.

•

5 Lid lock release

• To remove, loosen catch,- arrow - turn release 90° and remove from lock cylinder housing - 4 -.

6 Handle

7 Spreader clip