End Pipes, Aligning

End Pipes, Aligning

- Check the distance of the end pipes at left and right to bumper:






• Dimension - x - left = dimension - x - right

If necessary, correct dimension - x - as follows:

- Loosen threaded connections - arrow - of the brace between exhaust pipes.






- Adjust the distance between the rear mufflers.

- Tighten the threaded fastener to 25 Nm.

- Check distances - y - and - z - of end pipes to bumper:






• Dimension - y - = 17 to 19 mm.

• Dimension - z - = 0 +/- 2 mm.

- If necessary, check whether the exhaust system is aligned tension-free => [ Exhaust System, Installing ] Exhaust System, Installing.