Rear Parking Aid Sensors

Rear Parking Aid Sensors

Component location: In bumper - arrows -.





Removing

Inner Sensor on Vehicles with Trailer Hitch

- Remove rear bumper cover.

Inner Sensor on Vehicles without Trailer Hitch

- Remove bolts - arrows -.





- Reach behind bumper cover.

All

- Disconnect electrical harness connector - 1 - at sensor.





- Push both catches aside - arrows - and press sensor - 2 - through from outside toward inside.

Installing

Install in reverse order of removal, observing the following:

- Install the cover on the rear bumper.

Tightening Specifications