Comfort System Central Control Module J393 , Removing and Installing

Comfort System Central Control Module J393 , Removing And Installing

Location: At right in luggage compartment.

Removing
- If the control module is replaced, select respective module in "Guided Functions".
- Switch off ignition and remove ignition key.
- Remove right luggage compartment side trim panel.







- Release retaining springs - A arrows - and remove Comfort System Central Control Module J393 downward out of relay and fuse carrier - arrow B -.
- Release securing clip on connector - item 1 - and remove.
- Disconnect electrical connectors - 2 - and - 3 -.

Installing
Installation is reverse of removal.