Seat Rail Covers

Standard Front Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Standard Front Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.


Seat Rail Covers





1 Front seat

2 Rear seat rail covers (Qty. 2)

• Removing

- Drive front seat - 1 - to center position.

- Remove seat => [ Power Front Memory Seat ] Power Front Memory Seats.

- Pry out seat rail cover - 2 - from beneath or - 3 - on the inside.

- Pry out seat rail cover on the outside.

- Pull off seat rail cover - 2 - or - 3 - as straight as possible.

• Installing

To install, perform the steps used in removal in reverse order.

3 Front seat rail covers (Qty. 2)