Interior Rearview Mirror

Interior Rearview Mirror

• With the ball joint unclipped, mirror must be removed.

• Ball joint must be clipped in while in the removed state and thus the cable harness pulled through.





1 - Interior Rearview Mirror

• with automatic dimming function

Removing

- Remove front roof module.

- Disconnect connector of wire - 4 - from front roof module.

- Using a screwdriver on the left side, pry the interior rearview mirror out between the base plate - 7 - and mirror base - 3 -.

- Remove the interior rearview mirror.

Installing

- Check whether locking pin - 8 - is locked before installing.

- Feed wire - 4 - through mirror base opening in frame for front roof module.

- Insert right side of mirror base - 3 -.

- Clip in mirror base cover - 2 - on right side.

- Press up mirror base cover - 2 - on left side along with mirror base - 3 - until locking pin - 8 - engages.

- Connect harness connector of wire - 4 - to roof module.

- Install front roof module.

2 - Mirror base cover

3 - Mirror base

4 - Wiring

• Interior rearview mirror - front roof module

5 - Headliner

6 - Frame for front roof module

7 - Base plate

8 - Locking pin