Individual Rear Seat

Individual Power Rear Seats

Individual Rear Seat





1 Screw

• Tightening torque: 55 Nm

2 Tab

3 Individual rear seat

• Removing

- Remove seat pan => [ Seat Pan ]. Seat Pan

- Disconnect harness connectors - 7 -, - 8 -, - 9 - and - 10 -.

- Disengage cable harness - 13 - from body.

- Lift strap - 11 - and unscrew bolt - 12 -.

- Lift strap - 14 - and unscrew bolt - 15 -.

- Pull off strap - 2 - and unscrew bolt - 1 -.

- Open seatbelt guide - 5 - at clip - 6 -.

- Thread belt webbing - 4 - out of seatbelt guide - 5 -.

- Unscrew bolt at belt guide mounting point - 4 - => [ Outer Seat Belt Strap ]. Outer Seat Belt Strap

- Lift individual rear seat - 3 - upward and out of vehicle in direction of vehicle travel.

• Installing

- Install individual rear seat - 3 - in reverse order of removal.

- Ensure that individual rear seat - 3 - engage on left and right sides on sliders into guides in body.

4 Belt webbing

5 Belt webbing guide

6 Clip

7 Connector

8 Connector

9 Connector

10 Connector

11 Tab

12 Screw

• Tightening torque: 55 Nm

13 Cable harness

14 Tab

15 Screw

• Tightening torque: 55 Nm

16 Tab

17 Screw