Mounting Bracket

Mounting Bracket

Removing

- Remove trim on driver side.

- Remove brake booster. Refer to => [ Brake Booster ] Brake Booster.

- Remove brake light switch. Refer to => [ Brake Light Switch ] Service and Repair.

- Disconnect brake pedal from brake booster. Refer to => [ Brake Pedal and Brake Booster, Separating ] Brake Pedal and Brake Booster, Separating.

- Remove connections - 1 -.





- Mounting bracket - 2 -

- Bulkhead item - 3 -

Remove gas pedal

- Remove hex socket head bolts (9 Nm).

Remove brake pedal mounting bracket

- Remove bolt using Torx socket (T45).

Installing

Installation is the reverse of removal, with special attention to the following:

Brake Pedal and Brake Booster, Connecting

- Hold ball head of push rod in front of mounting and push brake pedal in direction of brake booster, so the ball head locates audibly. Refer to => [ Clip brake pedal together with brake booster. ] Brake Pedal and Brake Booster, Separating.

- Adjust brake light switch/brake pedal switch. Refer to => [ Brake Light Switch ] Service and Repair.

- Bleed brake system. Refer to => [ Brake System, Bleeding ] Brake System, Bleeding.


Make sure the brakes are working correctly before driving the vehicle for the first time.