Diagram 107/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transmission Control Module, CAN-Bus Disconnection Plug





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM) Control Modules Overview

J518 - Access/Start Control Module Control Modules Overview

J623 - Engine Control Module (ECM) Control Modules Overview

J624 - Engine Control Module 2 Engine Control Module

T16 - 16-Pin Connector, black, Data Link Connector (DLC), below instrument panel, left

T16c - 16-Pin Connector, black, on Transmission Control Module (TCM) Control Modules Overview

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17b - 17-Pin Connector, green, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17d - 17-Pin Connector, blue, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T46b - 46-Pin Connector, black, CAN-Bus Disconnection plug, right

(B469) - Connection 5 (in main wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

(D166) - K-Diagnosis Connection (in engine wiring harness)

(E18) - Connection 3 (in Motronic Multiport Fuel Injection (MFI) wiring harness)

(E26) - Connector (selector lever P/N) (in wiring harness) Motronic

• - CAN-Bus (Data-Bus)

* - => Engine Wiring Diagram

# - through 08.2007

## - from 09.2007

Previous Diagram 107/3 (Tracks 15-28)