Low Beam Bulb

Halogen Headlamps

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

• Adjust the headlamps after performing any work that could have affected their adjustment.

Low Beam Bulb

Removing

- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Remove appropriate front wheel.

- Remove appropriate front wheel housing liner.

- Loosen locking bolt - 1 - a few turns.





- Release retainer tabs - arrows - and detach low beam housing cover from headlamp housing.

- Turn socket counter-clockwise - arrow - and remove from headlamp housing.





- Remove bulb - 1 - from socket - 2 -.





Installing

Install in reverse order of removal, observing the following:

- Insert new bulb into socket, do not touch glass cone with bare hands when doing so.

- Secure socket by turning clockwise.

- Close housing cover and secure with screw.

- Install front wheel housing liner.