Horn: Service and Repair

Signal Horn/Dual Tone Horn

Removing





- Switch off ignition and remove ignition key.

Vehicles with Double Grille

- Remove bolts - arrows - on top of lock carrier and below Audi rings.

- Spray silicone-free lubricant into the gap between radiator grille and bumper cover.





- Pull the radiator grille - 1 - first in the places marked with - arrows A - out of the bumper cover.

- Next, pull the radiator grille down at - arrows B - out of the bumper cover.

Vehicles with Single Frame Grille

- Remove bumper cover.

All Vehicles





- Unplug connectors - 1 -.

- Remove nut - 2 - and remove signal horn/dual tone horn (H1) from bracket.

Installing





Install in reverse order of removal, observing the following:

- Make sure that outlet opening of signal horns - 1 - and - 9 - are aligned horizontally to the bumper, align if necessary.

- Connect electrical connections - 8 - and - 10 - to signal horns.

- Secure electrical wiring harness - 7 - to rear of signal horns with cable ties - 6 -.

• Ignore - arrows - and - items 2 through 7 -.

Vehicles with Double Grille

- The radiator grille must engage into the bumper cover audibly.

Vehicles with Single Frame Grille

- Install bumper cover.

Tightening Specifications