Wheel Alignment Measurement Preparations

Wheel Alignment Measurement Preparations

Special tools, testers and auxiliary items required

• Brake pedal actuator (VAG 1869/2)

• Spacer (VAG 1925)

• Vehicle diagnostic, test and information system (VAS 5051A)

• Diagnostic cable (VAS 5051/5A)

• Steering centering bolt (VAS 6224)

• Adapter (VAG 1925/1)

• Wheel alignment computer

• The measurement sensor must be properly adjusted and attached to the vehicle; observe the device manufacturer's operating instructions.

• Be sure that the sliding plates and turn tables are not touching the end stop when checking wheel alignment