Selector Lever Handle

Selector Lever Handle

Removing

- Move the selector lever into D.

- Rotate sleeve - 1 - clockwise until it engages. Slide sleeve down in this position.





- Remove the handle - 2 - from the selector lever.

Installing

Install in reverse order of removal.

- Move the selector lever into D.

- Place the sleeve - 1 - on the selector lever.

- Press the handle - 2 - all the way onto selector lever.

• Installed position: Button 2 faces the driver.

- Slide sleeve up while rotating until tabs on sleeve engage into the slits on the handle.

- Rotate the sleeve counter-clockwise until it engages.