"Zero" Position of Sunroof Motor (Link Guide), Checking and Adjusting

"Zero" Position Of Sunroof Motor (link Guide), Checking And Adjusting

Glass panel
- Tilt sunroof open.
- Pull off panel - 1 - from sunroof panel in direction of arrow, starting at front and working toward rear.







- Slide locking pin toward rear out of panel lock.
- Remove trim of panel downward.







- Pull off trim - 1 - from sunroof panel - 1 - completely toward vehicle interior and fold it downward and away.







- Zero position is correct when guide pin - 1 - is located between both markings - arrow on link guide.
- If necessary, slide link guides by hand into this position on both sides with panel and motor removed.

NOTE: Install panel in zero position only.

Solar panel







- For vehicles with solar panel - 1 -, open roof, pull headliner downward out of locking mechanism - arrow - and slide it into roof cutout toward rear.